Balancing the Crystallinity and Film Formation of Metal–Organic Framework Membranes through In Situ Modulation for Efficient Gas Separation

Polycrystalline metal–organic framework (MOF) layers hold great promise as molecular sieve membranes for efficient gas separation. Nevertheless, the high crystallinity tends to cause inter-crystalline defects/cracks in the nearby crystals, which makes crystalline porous materials face a great challenge in the fabrication of defect-free membranes. Herein, for the first time, we demonstrate the balance between crystallinity and film formation of MOF membrane through a facile in situ modulation strategy. Monocarboxylic acid was introduced as a modulator to regulate the crystallinity via competitive complexation and thus concomitantly control the film-forming state during membrane growth. Through adjusting the ratio of modulator acid/linker acid, an appropriate balance between this structural “trade-off” was achieved. The resulting MOF membrane with moderate crystallinity and coherent morphology exhibits molecular sieving for H₂/CO₂ separation with selectivity up to 82.5.     

Switchable Synthesis of 7- and 14-Membered Cyclic Peptides Containing N-Methyl- and β-Amino Acids Utilizing Microflow Technology

Smaller cyclic peptides containing non-proteinogenic amino acids have garnered much attention for use as drugs, but their chemical synthesis is extremely challenging. In this study, a rapid (60.5 min) synthesis of 7- and 14-membered cyclic peptides containing N-methyl- and β-amino acids was achieved by only switching the concentrations (0.20 M or 0.01 M) of the substrates. The developed approach required neither expensive transition-metals nor expensive coupling agents. As far as we could ascertain, this is the first report of the synthesis of smaller (≤16-membered) cyclic N-methylated peptides via dimerization-cyclization strategy.     

Electrochemistry and Spin-Crossover Behavior of Fluorinated Terpyridine-Based Co(II) and Fe(II) Complexes

Due to their ability to form stable molecular complexes that have tailor-made properties, terpyridine ligands are of great interest in chemistry and material science. In this regard, we prepared two terpyridine ligands with two different fluorinated phenyl rings on the backbone. The corresponding Co^II and Fe^II complexes were synthesized and characterized by single-crystal X-ray structural analysis, electrochemistry and temperature-dependent SQUID magnetometry. Single crystal X-ray diffraction analyses at 100 K of these complexes revealed Co−N and Fe−N bond lengths that are typical of low spin Co^II and Fe^II centers. The metal centers are coordinated in an octahedral fashion and the fluorinated phenyl rings on the backbone are twisted out of the plane of the terpyridine unit. The complexes were investigated with cyclic voltammetry and UV/Vis-NIR spectroelectrochemistry. All complexes show a reversible oxidation and several reduction processes. Temperature dependent SQUID magnetometry revealed a gradual thermal SCO behavior in two of the complexes, while EPR spectroscopy provided further insights on the electronic structure of the metal complexes, as well as site of reduction.     

Fe-Doped CoS2 Nanoarrays: Efficient Electrocatalytic Nitrate Reduction to Ammonia under Ambient Conditions

The electrocatalytic nitrate reduction reaction (NO₃⁻RR) enables the reduction of nitrate to ammonium ions under ambient conditions. It was considered as an alternative reaction for the production of ammonia (NH₃) in recent years. In this paper, we report that the Fe doping CoS₂ nanoarrays can effectively catalyze the formation of NH₃ from nitrate (NO₃⁻) under ambient conditions. This is mainly due to the increase of the NO₃⁻ reaction active site by Fe doping and the porous nanostructure of the catalyst, which greatly improves the catalytic activity. Specifically, at −0.9 V vs. RHE, the NH₃ yield rate (R_NH3) of Fe−CoS₂/CC is 17.8×10⁻² mmol h⁻¹ cm⁻² with Faraday Efficiency (FE) of 88.93 %. Besides, such catalyst shows good durability and catalytic stability, which provides the possibility for the future application of electrocatalytic NH₃ production.     

Flash Nanoprecipitation Fabrication of PEI@Amorphous Calcium Carbonate Hybrid Nanoparticles for siRNA Delivery

RNA interference (RNAi) is a promising approach for disease treatments. But the development of safe and effective delivery carriers remains a major challenge. Organic–inorganic hybrid nanoparticles (NPs), with the integration of functions from distinct materials, show great potential in small interfering RNA (siRNA) delivery. Herein, pH responsive amorphous calcium carbonate NPs (ACC NPs) are prepared using flash nanoprecipitation and hybrid NPs are constructed by coating ACC NPs with polyethyleneimine (PEI) for efficient siRNA delivery. PEI/ACC NPs show robust pH responsiveness and stability as well as effective siRNA loading and protection. Furthermore, siRNA-loaded PEI/ACC NPs demonstrate enhanced cellular uptake and efficient endosomal escape, mediating improved siRNA delivery compared to pure PEI. These findings suggest that PEI/ACC NPs may have great potential in siRNA delivery for RNAi-based therapy.     

Bioactive Phenylboronic Acid-Functionalized Hyaluronic Acid Hydrogels Induce Chondro-Aggregates and Promote Chondrocyte Phenotype

Hydrogels are extensively investigated as biomimetic extracellular matrix (ECM) scaffolds in tissue engineering. The physiological properties of ECM affect cellular behaviors, which is an inspiration for cell-based therapies. Photocurable hyaluronic acid (HA) hydrogel (AHAMA-PBA) modified with 3-aminophenylboronic acid, sodium periodate, and methacrylic anhydride simultaneously is constructed in this study. Chondrocytes are then cultured on the surface of the hydrogels to evaluate the effect of the physicochemical properties of the hydrogels on modulating cellular behaviors. Cell viability assays demonstrate that the hydrogel is non-toxic to chondrocytes. The existence of phenylboronic acid (PBA) moieties enhances the interaction of chondrocytes and hydrogel, promoting cell adhesion and aggregation through filopodia. RT-PCR indicates that the gene expression levels of type II collagen, Aggrecan, and Sox9 are significantly up-regulated in chondrocytes cultured on hydrogels. Moreover, the mechanical properties of the hydrogels have a significant effect on the cell phenotype, with soft gels (≈2 kPa) promoting chondrocytes to exhibit a hyaline phenotype. Overall, PBA-functionalized HA hydrogel with low stiffness exhibits the best effect on promoting the chondrocyte phenotype, which is a promising biomaterial for cartilage regeneration.     

Microinjection Molded Biopolymeric Airway Stent with Antibacterial and Anti-Hyperplastic Properties

Central airway stenosis is a condition that the diameter of the trachea or main bronchus shrinkage is caused by external compression or internal tissue hyperplasia, which can cause difficulty breathing, asphyxia, and even death. Airway stenting is an easy way to restore the patency of the central airway, but airway stents commonly used in clinical practice can lead to complications such as mucus plugging, bacterial infection, and granulation tissue hyperplasia. Moreover, the non-degradable characteristic makes it requires a second operation to remove, which has the potential to cause tissue damage. In this study, a biodegradable airway stent is fabricated by microinjection molding using the bioelastomer of poly (L-lactide-co-ε-caprolactone) as the matrix material. The airway stent has excellent mechanical properties and an appropriate degradation rate. The hydrophilic surface of the airway stent can inhibit mucus plugging. The loading of silver nanoparticles and cisplatin endows the stent with antibacterial and anti-hyperplastic functions. In vitro and in vivo experiments demonstrate that this study provides an antibacterial and anti-hyperplastic biodegradable airway stent with elastic properties to avoid secondary removal operation and reduce complications associated with mucus plugging, bacterial infection, and granulation tissue hyperplasia.     

Semi-Empirical Model to Retrieve Finite Temperature Terahertz Absorption Spectra using Morse Potential

Terahertz (THz) absorption is a fingerprint property of materials, due to the underlying low-frequency vibration/phonon modes being strongly dependent on the chemical constitutions and microscopic structures. The low excitation energies (0.414-41.4 meV) are related to two intrinsic properties of THz vibrations: the potential energy surfaces (PESs) are shallow, and the vibrationally excited states are usually populated via thermal fluctuations. The shallow PESs make the vibrations usually anharmonic, leading to redshifted vibrational excited state absorption; combined with considerable vibrational excited states population, characteristic THz signals are usually redshifted and congested with varying degrees at different temperatures. Combining existing experimental THz spectra at low temperatures, first principles vibration analysis, and the Morse potential, we developed a semi-empirical model to evaluate the anharmonicity of the low-frequency modes. The model was benchmarked with purine molecular crystal to generate THz spectra at different temperatures, the results were consistent with experiments. The good agreement suggests this model would facilitate the application of THz spectroscopy in molecular crystal characterization.     

Non-Interacting Ni and Fe Dual-Atom Pair Sites in N-Doped Carbon Catalysts for Efficient Concentrating Solar-Driven Photothermal CO2 Reduction

Solar-to-chemical energy conversion under weak solar irradiation is generally difficult to meet the heat demand of CO₂ reduction. Herein, a new concentrated solar-driven photothermal system coupling a dual-metal single-atom catalyst (DSAC) with adjacent Ni−N₄ and Fe−N₄ pair sites is designed for boosting gas-solid CO₂ reduction with H₂O under simulated solar irradiation, even under ambient sunlight. As expected, the (Ni, Fe)−N−C DSAC exhibits a superior photothermal catalytic performance for CO₂ reduction to CO (86.16 μmol g⁻¹ h⁻¹), CH₄ (135.35 μmol g⁻¹ h⁻¹) and CH₃OH (59.81 μmol g⁻¹ h⁻¹), which are equivalent to 1.70-fold, 1.27-fold and 1.23-fold higher than those of the Fe−N−C catalyst, respectively. Based on theoretical simulations, the Fermi level and d-band center of Fe atom is efficiently regulated in non-interacting Ni and Fe dual-atom pair sites with electronic interaction through electron orbital hybridization on (Ni, Fe)−N−C DSAC. Crucially, the distance between adjacent Ni and Fe atoms of the Ni−N−N−Fe configuration means that the additional Ni atom as a new active site contributes to the main *COOH and *HCO₃ dissociation to optimize the corresponding energy barriers in the reaction process, leading to specific dual reaction pathways (COOH and HCO₃ pathways) for solar-driven photothermal CO₂ reduction to initial CO production.     

Growing ZIF-8 Seeds on Charged COF Substrates toward Efficient Propylene-Propane Separation Membranes

We report a covalent organic framework (COF) induced seeding strategy to fabricate metal–organic framework (MOF) membranes. Contrary to graphene oxide nuclei-depositing substrate, COF substrate has uniform pore size, high microporosity and abundant functional groups. We designed a series of charged COF nanosheets to induce the formation of ZIF-8@COF nanosheet seeds with high aspect ratio over 150, which were readily processed into a compact and uniform seed layer. The resulting ZIF-8 membranes with thickness down to 100 nm exhibit an ultrahigh C₃H₆/C₃H₈ separation performance and superior long-term stability. Our strategy is also validated by fabricating ultrathin ZIF-67 and UiO-66 membranes.